PNA Group Inc :: Official Website


Go to content

High Tack Striped

Pathway Markings > Tapes

TAPES AVAILABLE:

Model: 50F-1STP
1 Inch X 100 Foot Roll Striped Tape with High Tack Adhesive (comes in Black Stripes Only)


Model: 50F-2STP
2 Inch X 100 Foot Roll Striped Tape with High Tack Adhesive (comes in Black Stripes Only)


Model: 7520-2-STRIPE-B
2 Inch X 30 Foot Roll Striped Tape with High Tack Adhesive (Black Stripes)


Model: 7520-2-STRIPE-G
2 Inch X 30 Foot Roll Striped Tape with High Tack Adhesive (Green Stripes)


Model: 7520-2-STRIPE-R
2 Inch X 30 Foot Roll Striped Tape with High Tack Adhesive (Red Stripes)


Model: 7530-2-STRIPE-B
2 Inch X 30 Foot Roll Striped Tape with High Tack Adhesive (Black Stripes)


Model: 7530-2-STRIPE-G
2 Inch X 30 Foot Roll Striped Tape with High Tack Adhesive (Green Stripes)


Model: 7530-2-STRIPE-R
2 Inch X 30 Foot Roll Striped Tape with High Tack Adhesive (Red Stripes)



About the High Tack Striped Tape

Glo Brite® Stripe Tape is a flexible laminated, printed film that is perfect for marking pathway obstructions that may be hazardous in blackout and very smoky conditions. This tape absorbs and stores energy from ambient light, and is immediately visible in sudden darkness. Glo Brite® Stripe Tape easily affixes to most wood, metal, concrete, plaster and painted surfaces. Incomparably reliable, Glo Brite® Stripe Tape is perfect for your low-level emergency egress system.

This particular tape is used to mark obstacles within the egress route.

Technical Data

  • Availability: 1" or 2" X 100-ft (7550 Series) / 2” x 30-ft. rolls (7520 or 7530 Series), Custom sizes available upon request Red, Green or Black striping available for the 7520 and 7530 Series and just Black striping available for the 7550 Series
  • Construction: Flexible laminated, printed film, coated with permanent acrylic pressure-sensitive adhesive and backed by polycoated release liner
  • Illumination: High Visibility Yellow/Green
  • Installation: Position, peel-off backing and apply to dry, non-oily surface. Minimum application temperature 50° F
  • Thickness: .012 +/- 10% (film/adhesive)
  • UV Stability: Excellent





Home | PL Exit Signs | Pathway Markings | Safety Stickers | Safety Vests | Bulk Products | Resources | Site Map


Back to content | Back to main menu